Modello Quattro U4S-BRZ-MLL
Collab - Time Only
UNIMATIC x Massena LAB
Tapisserie dial in deep burnt peat color; tone-on-tone "ghost signature"
Due to the material's nature, the watch's bronze case will oxidize and change color over time
Ref. u4s-brz-mll
This product is sold out
Buy Now, Pay Later. 3 payments at 0% interest.
Estimated shipping within 2/4 business days.
You may return the product within 14 days.
24 months warranty.
Description Discover more
Modello Quattro ref. U4S-BRZ-MLL is a Made in Italy slim minimal military watch in bronze.
It features a hand made in Italy bronze-like tapisserie dial with hand-applied Super-LumiNova® GL light old radium.
Time is displayed thanks to metallic gold ladder handset and the reverse lollipop second hand with Super-LumiNova® second tip. The flat anti-reflective sapphire crystal provides the best performance in every light condition.
The thin bronze case, the screwed-in 2mm thick caseback, the 8mm diameter crown together with the high-quality gaskets set to provide water resistance tested individually to 30 atm=300m=1000ft. Timing accuracy is guaranteed by the automatic calibre Sellita SW200-1 movement tuned to 28,800bph with 38h power reserve and hacking second-hand.
It comes on a milk shake distressed leather strap, an extra foliage green TPU two-piece strap with a bronze brushed finish buckle signed Unimatic. The titanium caseback features Unimatic x Massena LAB engraving and the individual progressive number. The watch is covered by a 24-month worldwide warranty and is part of a unique edition of 99 pieces.
Movement
Automatic calibre Sellita SW200-1 28,800bph
Hacking seconds hand
Self-winding/ manual winding
Accuracy +/- 12 sec/day up to +/-30 sec/day
38h power reserve
Anti-magnetic ≥4800 A / m
Case
Diameter 40mm case
Anti-reflective coating on lens inner-side
CuSn8 Bronze brushed finish
Unimatic x Massena LAB titanium screw-down caseback
Dial
Hand made in Italy bronze-like tapisserie dial
Hand-applied Super-LumiNova® GL light old radium
Durability & Protection
300m = 1000ft = 30atm WR
2.8mm thick flat sapphire
Design
Unimatic tough case, warranty card with unique ID seal
Watch Kit
Milk shake distressed leather strap
EXTRA Foliage green TPU two-piece strap
Bronze brushed finish buckle signed Unimatic
FAQ Frequently Asked Questions
What is the difference between the Automatic, Quartz and Meca-Quartz movements?
Automatic movements are powered by the motion of your wrist and prized for their craftsmanship. Quartz movements run on a battery for maximum precision and low maintenance. Meca-Quartz pairs a quartz base with a mechanical chronograph module, combining accuracy with a mechanical feel.
Are UNIMATIC watches truly professional diver tools?
Yes. Every diver is water resistant to 300m, individually pressure-tested, and built around a screw-down caseback and crown with a mono-directional safety bezel, fully rated for professional diving.
Why is every UNIMATIC watch individually numbered?
Each piece is produced and individually numbered with an engraved number on the caseback.
Inside the packaging, the international warranty card handwritten, further confirming the authenticity and unique place of each piece within the series.
How durable are UNIMATIC watches for daily wear?
The 316L stainless steel case, double-domed sapphire crystal with anti-reflective coating and 360° protection system are engineered to take daily knocks in stride, from the desk to the water.
What kind of lume is used for low-light visibility?
Hands and indices are treated (unless stated) with Super-LumiNova® colours picked to match the design details, delivering a strong, long-lasting glow for clear legibility in low-light and underwater conditions. It is not radioactive and requires exposure to light (natural or artificial) to charge.
How can I find out the lug width on my UNIMATIC watch
All UNIMATIC watches have a lug width of 22mm.
What is the size of the strap?
All our straps are designed to fit our watches, which use 22 mm wide straps.
They are available in one size only.
To check whether the strap will fit your wrist, please refer to the size information in the product page.
Are UNIMATIC watches water resistant?
All UNIMATIC cases are engineered to provide exceptional water resistance. Every UNIMATIC watch is individually tested to ensure a minimum water resistance of 300m (30 ATM), while selected on case modello 1 featuring our enhanced case construction are tested to withstand 600m (60 ATM).
Before exposing your watch to water, always make sure the crown and, where applicable, the pushers are fully screwed down and securely tightened. Never operate the crown or pushers while the watch is underwater.
After use in seawater, rinse the watch thoroughly with fresh water and dry it completely.Please refer to your specific model's technical specifications to confirm its certified water resistance rating.
What is an automatic watch?
The UNIMATIC automatic watch is a self-winding mechanical timepiece powered not by a battery, but by the natural kinetic energy generated from the wearer’s arm movements.
Automatic watches are more sensitive to factors like temperature fluctuations, impacts, and how they are worn.
Consequently, they may not run as precisely as quartz watches, and any timekeeping variations depend on the specific movement type.
Based on experience, new mechanical watches may initially show slight time inaccuracies, which generally self-regulate over time.
What is a reference number?
A reference number is an alphanumeric code associated with each watch model (e.g., U1S-T-MP).
You can find the reference number in the documents provided at the time of purchase, such as the International Warranty certificate, or on the case-back of your watch.
Does the stainless steel bracelet fit my watch?
The UNIMATIC UBR-TLQ18 solid stainless steel bracelet is compatible with almost all the UNIMATIC lineup. Above is a chart to help you choose the correct end-link variation for your watch. Please note that the bracelet is available in two different finishes: Brushed and Sandblasted. While a bracelet may be mechanically compatible with your watch in terms of fit and attachment, it may not match the watch aesthetically if the finish is different.
What they say about us
